Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation


Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
   - Brakes
      General description
      + Diagnostics
      Diagnostic table
      - Check and adjustment
         Stravlivaniye of air from brakes
         Check of free height of the brake lever
         Adjustment of the light switch of brakes
         Check it is superfluous a pedal course
         Check of a free wheeling of the brake lever
         Check of level of brake liquid
         Check of a brake hose and highway
         Check of the main cylinder
         Check of a brake disk
         Check of a brake shoe
         Check of a brake boot
         Check and adjustment of the parking brake
         Washing of hydraulic system of brakes
         Check of pressure of liquid (if the car is equipped with LSPV)
         Check of operation of the brake amplifier
      Specifications - an inhaling torque
      Necessary materials for service
      Special tool
   + Brake highway/hose / main cylinder of a brake
   + Forward brakes
   + Parking and back brake
   + Anti-blocking brake system (ABS)
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

5917e1e5


Check of a free wheeling of the brake lever

 PERFORMANCE ORDER

  1. The free wheeling of a pedal should correspond to the specification. If it does not correspond to the specification, check correctness of position of the switch of a lamp of a brake and adjust, if it is necessary.
  2. Also check, whether the bolt of an axis of a pedal and the piston of the main cylinder are stirred up and replace, if they are faulty.
Free wheeling of the brake lever "d": 1 — 8 mm (0.04 — 0.32 inches).