The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Check of operation of the brake amplifier//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
   - Brakes
      General description
      + Diagnostics
      Diagnostic table
      - Check and adjustment
         Stravlivaniye of air from brakes
         Check of free height of the brake lever
         Adjustment of the light switch of brakes
         Check it is superfluous a pedal course
         Check of a free wheeling of the brake lever
         Check of level of brake liquid
         Check of a brake hose and highway
         Check of the main cylinder
         Check of a brake disk
         Check of a brake shoe
         Check of a brake boot
         Check and adjustment of the parking brake
         Washing of hydraulic system of brakes
         Check of pressure of liquid (if the car is equipped with LSPV)
         Check of operation of the brake amplifier
      Specifications - an inhaling torque
      Necessary materials for service
      Special tool
   + Brake highway/hose / main cylinder of a brake
   + Forward brakes
   + Parking and back brake
   + Anti-blocking brake system (ABS)
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Check of operation of the brake amplifier

There are two ways of performance of this survey, with a tester and without it. It is usually possible to define approximately a condition without tester use.

For carrying out this check, be convinced that in the hydraulic highway there is no air.

Survey without a tester

Air impermeability check

 PERFORMANCE ORDER

  1. Start the engine.
  2. Stop the engine after it will work 1-2 minutes.
  3. Press several times the brake lever with that effort, as at usual braking and pay attention to a pedal course. If the pedal the first аз leaves deeply, but its course decreases at the second and the subsequent pressing, necessary degree of air impermeability is reached.
1 — the 1st
2 — 2nd
3 — 3rd
  1. If the course of a pedal does not change, necessary degree of air impermeability, is not reached.

In case of malfunction, examine vacuum lines of consolidation and replace any faulty elements.

  1. After that repeat all procedure of check.
1 — the 1st, the 2nd, the 3rd

Work check

 PERFORMANCE ORDER

  1. When the engine is stopped, several times press the brake lever with the same effort and be convinced that the course of a pedal does not change.
  2. Start the engine, having pressed the brake lever. If the pedal course increases a little, the brake works normally. If the course of a pedal does not change, it testifies to malfunction.

Air impermeability check under loading

 PERFORMANCE ORDER

  1. When the engine works, press the brake lever. Then stop the engine, holding the brake lever the pressed.
H — hold
  1. Hold the brake lever pressed during 30 seconds. If the height of a pedal does not change, a brake condition the good. But if the pedal rises, a brake condition the bad.

H — hold
T — 30 seconds