Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
   + Brakes
   + Brake highway/hose / main cylinder of a brake
   - Forward brakes
      - General description
         Assembly of a support of a brake disk
      Diagnostics
      Check and adjustment
      + vehicle Service
      Inhaling torque
      Necessary materials
   + Parking and back brake
   + Anti-blocking brake system (ABS)
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Forward brakes

General description

Assembly of a support of a brake disk

All fastenings of a brake are important elements of fastening and can affect work of the vital parts and systems, and/or much more to increase repair cost. It is necessary to replace them with details having the same number or equivalent if such replacement is necessary. Do not use for replacement of a detail of the worst quality or substitutes. It is necessary to observe the specified values of a torque of an inhaling at assembly to provide long service life of all details. It is not necessary to use welding as it can lead to extensive damages and weakening of metal.

This support is established on the holder of a support of a brake by two bolts of a support. The hydraulic effort created by pressing the brake lever, is transformed by a support to a friction. The hydraulic effort equally influences the piston and the lower part of the channel of a support to submit the piston outside, and a support inside that leads to a disk blocking/clip. The effort of a clip presses brake slips to a disk, creating necessary pressure to stop a vehicle.

Grease parts as it is specified. Do not use the production compressed air for greasing of parts of brake system as it can damage rubber parts. If you remove any components or disconnect highways, pit air from brake system. Replace blocks only with sets. Values of a torque of an inhaling are specified for dry, ungreased fastenings.
For definition such as a brake support, see the name of the producer or an inscription on a brake support.

Production TOKICO


1 — a bolt of the holder of a brake 2 — a block 3 — a support of a brake disk (the cylinder of a brake disk) 4 — piston consolidation 5 — the piston of a brake disk 6 — a cylinder block 7 — an internal block of a brake disk 8 — an external block of a brake disk 9 — the holder of a support of a brake 10 — a block spring	11 — a stopper of a latch of a safety valve 12 — a cover of a stopper of a safety valve 13 — a bolt of a pin of a sled of a support (M12) 14 — soundproofing laying 15 — internal laying 16 — a bolt of a pin of a support (M10) 17 — a sleeve of a sled of a support 18 — a support pin 19 — a bolt of a pin of a support

Production SUMITOMO ELECTRIC


1 — a bolt of the holder of a brake 2 — a block 3 — a support of a brake disk (the cylinder of a brake disk) 4 — piston consolidation 5 — the piston of a brake disk 6 — a cylinder block 7 — an internal block of a brake disk 8 — an external block of a brake disk 9 — the holder of a support of a brake 10 — a block spring	11 — a stopper of a latch of a safety valve 12 — a cover of a stopper of a safety valve 13 — a bolt of a pin of a sled of a support (M12) 14 — soundproofing laying 15 — internal laying 16 — a bolt of a pin of a support (M10) 17 — a sleeve of a sled of a support 18 — a support pin 19 — a bolt of a pin of a support

Inhaling torque.

Apply greasing to rubber.

Not иcпользовать repeatedly.