Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   - Forward suspension bracket
      General description
      + Diagnostics
      + Service out of a workshop
   + Back suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


5917e1e5



Suspension bracket

Forward suspension bracket

General description

  • All fixing elements of a forward suspension bracket are very important, as work of the main parts and systems depends on them, and/or they can affect repair cost. In need of their replacement it is necessary to use only details with the same number or similar details. Never use for replacement suitable details of more poor quality. To provide good fastening of a detail at its replacement it is necessary to use the specified values of the moment of an inhaling.
  • Never try to heat up, temper or straighten any parts of a forward suspension bracket. Replace the damaged part new, differently it will break.

The forward suspension bracket represents an independent suspension bracket on racks. The top end of a rack fastens to a body rack support. The rack and its support are isolated from each other by a rubber opravka.

The bottom end of a rack incorporates from the top end of a rotary pin, and the bottom end of a rotary pin incorporates to a hairpin of a spherical tip which is an element of the lever of a suspension bracket. And this rotary pin incorporates to a tip of steering draft.

Thus, movement of a steering wheel is transferred to a tip of steering draft, and then on a pin, forcing to move wheels.

1 — a body
2 — a rack
3 — a rotary pin
4 — the suspension bracket lever (the bottom lever)

5 — a hairpin with a spherical tip
6 — the wheel bearing
7 — a flange of a drive of an axis of a shaft
8 — a wheel