Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   - Steering wheel and steering column
      + the Steering wheel and a steering column not equipped with a safety cushion
      - Steering wheel and steering column with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            + Precautionary measures at service
            The module (having inflated) pillows of the driver
            - Steering wheel
               The centering contact coil
            Contact coil and podrulevy switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Bottom shaft of a steering
            Check of a steering column and the top shaft of a steering on existence of damages at failure (at not a cabriolet)
            Check of a steering column on damages at failure (at a cabriolet)
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Steering wheel  

Removal of a steering wheel allows the contact coil to turn freely, but do not turn the coil (on podrulevy switches) on bigger, than it is admissible, the quantity of turns (about two and a half turns from the central situation clockwise or counter-clockwise respectively), differently the coil will break.



  1. Remove the module (having inflated) safety cushions of the driver from a steering wheel as it is described above in this Chapter in the Section Module (having inflated) pillows of the driver.
  2. Remove a nut of a steering shaft.
  1. Put leveling labels (1) on a steering wheel and a shaft that then on them it is correct to establish.
  1. Remove a steering wheel (1) special tool. Special tool (A): 09944-36011.

Do not beat a hammer on the shaft end. It can weaken the plastic pins regulating length of a column, and to worsen udaropogloshchayushchy properties of a column.

Not cabriolet.