Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
+ Suspension bracket, wheels and tires
+ Adjustment of corners of installation of wheels of a forward suspension bracket
+ power steering System
- Steering wheel and steering column
+ the Steering wheel and a steering column not equipped with a safety cushion
- Steering wheel and steering column with a safety cushion
General description
+ Diagnostics
- Service out of a workshop
+ Precautionary measures at service
The module (having inflated) pillows of the driver
+ Steering wheel
Contact coil and podrulevy switches
Steering column (at not a cabriolet)
The top shaft of a steering (at not a cabriolet)
Steering column (at a cabriolet)
Steering lock (ignition switch)
Bottom shaft of a steering
Check of a steering column and the top shaft of a steering on existence of damages at failure (at not a cabriolet)
Check of a steering column on damages at failure (at a cabriolet)
Lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Steering lock (ignition switch)
Removal
|
|
- Remove a steering column (1). See in this Chapter Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).
|
|
- By means of the center puncher (1), weaken and remove fixing bolts (2) helmsmen of the lock.
|
|
|
Be careful not to damage the puncher aluminum parts of the steering lock. |
- Turn the ignition key in the situation "ACC" or "ON" and remove the steering lock from a steering column.
|
|
Installation
|
|
- Arrange an oblong opening of a steering shaft (2) in the middle of an opening in a column.
- Turn the ignition key in the situation "ACC" or "ON" and put the steering lock on a column
- Now turn the ignition key in the situation "LOCK" and take out from the lock.
- Combine the lock plug with an oblong opening of a steering shaft and повращайте a shaft to be convinced that it is blocked.
|
|
- Tighten new bolts until at them heads will not break off.
|
- Turn the ignition key in the situation "ACC" or "ON" and check that the steering shaft rotates smoothly. Also check operation of the lock.
- Establish a steering column as it is described in this Chapter in Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).
|
|
|
|
