Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   - Steering wheel and steering column
      + the Steering wheel and a steering column not equipped with a safety cushion
      - Steering wheel and steering column with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            + Precautionary measures at service
            The module (having inflated) pillows of the driver
            + Steering wheel
            Contact coil and podrulevy switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Bottom shaft of a steering
            Check of a steering column and the top shaft of a steering on existence of damages at failure (at not a cabriolet)
            Check of a steering column on damages at failure (at a cabriolet)
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


5917e1e5



Bottom shaft of a steering

Never turn a steering wheel at the removed bottom steering shaft. If a steering wheel to turn and bring down from the central situation the contact coil (on podrulevy switches), it again should be aligned. Turn of a steering wheel more, than on two and a half turns will break the contact coil.

Removal

 PERFORMANCE ORDER

  1. Turn a steering wheel so that forward wheels of the car were directed directly forward.
  2. Turn the ignition switch in the situation "LOCK" and take out a key.
  3. Put leveling labels (3) on the coupling of a shaft (2) and a shaft (on the party of the top shaft or on the column party) that on them it is correct to establish into place.
1 — a steering column
2 — the coupling of a steering shaft
3 — labels
  1. Having removed a bolt (4) from the shaft coupling from the top shaft or a column and having weakened a bolt (5) from the bottom shaft, pull the coupling of a shaft (2) towards the bottom shaft (as shown shooters in drawing below).
1 — the top shaft or a steering column
2 — the shaft coupling
3 — the bottom steering shaft
4 — a bolt from the top shaft
5 — a bolt from the bottom shaft
  1. Put leveling labels on the bottom coupling bottom a shaft of an and a shesterenchaty shaft that on them it is correct to establish.
  1. Remove a bolt (2) bottom couplings of the bottom shaft, then remove the bottom shaft.
  1. Remove a bolt of the coupling of a shaft (from the bottom shaft) from the shaft coupling, then remove the coupling of a shaft (3) from the bottom shaft (1).

Installation

 PERFORMANCE ORDER

  1. Be convinced that forward wheels and a steering wheel are directed directly forward.
  1. Combine a flat part of "A" of the bottom shaft with an opening for a bolt of "B" of the coupling of a shaft (2). Then insert the shaft coupling into the bottom shaft.
  1. Establish a bolt of the coupling of a shaft (from the bottom shaft) on the shaft coupling. Tighten manually.
  2. Insert a shesterenchaty shaft into the bottom coupling of the bottom shaft (2) shlitsa (1) bottom coupling, having combined labels (4) on shesterenchaty to a shaft (5) and a case of a transmission (6).
  3. Then establish a bolt (3) bottom couplings of the bottom shaft on the bottom coupling of the bottom shaft (2). Tighten to the specified value of the moment of an inhaling. Inhaling moment: bolt of the bottom coupling of the bottom shaft (and): 25 N • m (2.5 kg-m, 18.0 pounds foots).
1 — the bottom steering shaft
2 — the bottom coupling
3 — a bolt of the bottom coupling
4 — the coupling of a steering shaft
5 — a shesterenchaty shaft
6 — a transmission case
  1. Establish the coupling of a steering shaft (2) on a steering shaft, having combined the labels (3) put before removal.

Be convinced that forward wheels and a steering wheel are directed directly forward.


1 — the top shaft or a steering column
2 — the coupling of a steering shaft
3 — labels
  1. Establish a bolt of the coupling of a shaft (from the top shaft or a column) (2) on the coupling of a shaft (1). At first tighten a bolt of the coupling of a shaft (from a column) (3) to the specified value of the moment of an inhaling, and then a bolt of the coupling of a shaft (from the bottom shaft) to the specified value of the moment of an inhaling. Inhaling moment: bolt of the coupling of a shaft (b): 25 N • m (2.5 kg-m, 18.0 pounds foots).