Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
+ Suspension bracket, wheels and tires
+ Adjustment of corners of installation of wheels of a forward suspension bracket
+ power steering System
- Steering wheel and steering column
+ the Steering wheel and a steering column not equipped with a safety cushion
- Steering wheel and steering column with a safety cushion
General description
+ Diagnostics
- Service out of a workshop
+ Precautionary measures at service
The module (having inflated) pillows of the driver
+ Steering wheel
Contact coil and podrulevy switches
Steering column (at not a cabriolet)
The top shaft of a steering (at not a cabriolet)
Steering column (at a cabriolet)
Steering lock (ignition switch)
Bottom shaft of a steering
Check of a steering column and the top shaft of a steering on existence of damages at failure (at not a cabriolet)
Check of a steering column on damages at failure (at a cabriolet)
Lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
Special tool
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Contact coil and podrulevy switches
|
|
Do not turn the contact coil (on podrulevy switches) on more, than the admissible number of turns (about two and a half turns from the central situation on and counter-clockwise respectively), differently the coil will break. |
Removal
|
|
- Remove a steering wheel from a steering column. See in this Chapter Undressed the Steering wheel.
- Uncover openings of a steering column (1).
- Remove bolts (1) cover of a steering column (3 pieces).
- Divide the top cover (2) and the bottom cover (3), then remove them.
- Disconnect all cables of the contact coil and podrulevy switches.
|
|
A — Not a cabriolet
B — the Cabriolet |
- Remove the contact coil and podrulevy switches (1) from a steering column.
Not cabriolet
Cabriolet
|
|
1 — the contact coil and podrulevy switches
2 — a bolt |
- Check wires of the contact coil and podrulevy switches on existence of an oplavleniye or other damages. If damages are found, it is necessary to replace wires.
|
|
A — Not a cabriolet
B — the Cabriolet
1 — the contact coil and podrulevy switches |
|
|
Installation
|
|
- Be convinced that forward wheels of the car are directed directly forward, and the switch of ignition is in the situation "LOCK".
- Establish the contact coil and podrulevy switches on a steering column.
|
|
The new contact coil and podrulevy switches is completed with a set of the coil and keeps in the central situation by a lock pin and a sealant. Having established the contact coil and podrulevy switches on a steering column, remove this lock pin. |
|
|
A — Not a cabriolet
B — the Cabriolet
1 — a sealant (if is available, remove a lock pin after installation of the contact coil and podrulevy switches)
2 — a lock pin (if is available, remove a lock pin after installation of the contact coil and podrulevy switches) |
- Connect all cables disconnected at removal.
- Establish top (2) and the bottom (3) covers of a steering column, then tighten bolts (1) cover of a steering column.
|
|
At installation of the top and bottom covers pay attention to that between them wires of the contact coil and podrulevy switches did not get. |
|
|
A — Not a cabriolet
B — the Cabriolet
* — a standard bolt
** — bolt-samorez |
- Establish a cover of an opening of a steering column (1).
- Establish a steering wheel on a steering column. See in this Chapter Undressed the Steering wheel.
Not cabriolet
|
|
1 — a cover of an opening of a steering column |
Cabriolet
|
|
1 — a cover of an opening of a steering column |
|
|
|
|
