Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
+ Brakes
+ Brake highway/hose / main cylinder of a brake
+ Forward brakes
- Parking and back brake
+ General description
- Diagnostics
Check and adjustment
Vehicle service
Cable of the parking brake
Brake drum
Brake shoe
Brake cylinder
Back plate of a brake
+ Anti-blocking brake system (ABS)
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Back plate of a brake
Removal
|
|
- Execute item of 1-5 procedure of removal
of the Section the Brake drum.
- Execute item of 2-5 procedures of removal
of the Section the Brake shoe.
- Execute item of 3-4 procedures of removal
of the Section the Brake cylinder.
|
|
- Remove a cable (3) from a back plate of a brake (1), having compressed a cap of a cable of the parking brake (2).
|
- Merge transmission oil from a reverse gear.
|
|
- Remove nuts of the holder of the bearing of a wheel (1) from the case of a back shaft.
|
|
|
- Using the special tool, take out an axis of a back shaft from a back plate of a brake.
- Special tool:
- (A): 09943-35512
- (B): 09942-15510
|
- Remove a back plate of a brake (3) from an axis of a back shaft (1).
|
|
1 — axes of a back shaft
2 — the wheel bearing
3 — a back plate of a brake |
|
|
Installation
|
|
|
|
- Put a sealant on the interfaced surfaces of the holder of the bearing (1) and a back plate of a brake. "A": sealant 99000-31110.
|
|
|
Surely remove old consolidation before drawing of the new. |
|
|
- Establish a back plate of a brake (2) on an axis of a back shaft (1).
|
- Put a sealant in a connecting seam of the case of a back shaft (1) and a back plate of a brake. "A": consolidation 99000-31110.
|
|
Surely remove old consolidation before drawing of the new. |
|
|
1 — the case of a back shaft |
- Establish an axis of a back shaft on the case of a back shaft.
|
|
- Tighten nuts of a back plate of a brake according to an inhaling torque. Inhaling torque: a nut of a back plate of a brake (a) — 23 N • m (2.3 kg-m, 17.0 pounds foots).
|
- Establish the wheel cylinder, and tighten bolts of the wheel cylinder and a cap nut (or nuts) the brake highway according to an inhaling torque (address to item of 1-4 procedure of installation
of the Section the Brake cylinder).
- Establish a cable of the parking brake (3) on a back plate of a brake (1).
|
|
1 — a back plate of a brake
2 — a cable cap
3 — a cable of the parking brake |
- Establish brake shoes, having addressed to item of 1-5 procedure of installation
the Brake shoe Undressed.
- Establish a brake drum. Address
to the Section the Brake drum.
- Again fill the differential case with new transmission oil of the specified brand. Address to the Section Servicing in Head Back differential.
- Fill a tank with brake liquid and pit air from brake system (see the operation description in air Stravlivaniye's Section from brakes in Head Brake system).
|
|
- Establish a wheel and tighten nuts of wheels with the specified torque of an inhaling. Inhaling torque: wheel nut (b): 100 N • m (10.0 kg-m, 72.5 pounds foots).
|
- On termination of works, press the brake lever with effort about 30 kg (66 pounds) from three to ten times to receive a necessary gap between a drum and a boot.
- Adjust a cable of the parking brake (for adjustment address to the Section Check and adjustment of the parking brake in Head Brake system).
- Establish a back central console box.
- Check and be convinced that the brake drum does not jam, and brakes work correctly. Then remove a vehicle from the lift and execute check of brakes (a foot brake and the parking brake).
- Check, whether there are no leakages of oil in all established parts.
|
|
|
|
