Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
+ Mechanical transmission (type 1)
+ Mechanical transmission (type 2)
- Automatic transmission (4 A/T)
+ General description
+ Diagnostics of an automatic transmission
+ Precautionary measures at diagnostics of malfunctions
+ Visual survey
- Service out of a workshop
Liquid level
Liquid replacement
Hoses of a cooler of oil
Cable of a throttle of an automatic transmission
Manual selector
Gear shifting cable
Switch (sensor) of a range of transmission
The sensor of speed on an exit of an automatic transmission
Interruption switch on demand
Solenoidal valves
Switch of change of food \norm
Tubes of a cooler of oil
+ System of blocking of brakes
+ system Check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Manual selector
Tip-1
Tip-2
Removal (for type-1)
|
|
- Disconnect "minus" a battery cable.
- Remove a console box.
- Disconnect the socket of a lamp of illumination, the solenoid of blocking of switching and the switch of raising transfer.
- Disconnect a blocking cable from a blocking cam on the lever of a choice of transfer.
- Remove fixing bolts of the lever of a choice of transfer.
- Disconnect a cable of a choice of transfer from the lever of a choice of transfer.
|
|
Removal (for type-2)
|
|
- Disconnect "minus" a battery cable.
- Remove a console box.
- Disconnect the socket of a lamp of illumination, the solenoid of blocking of switching (if is available) and the switch of raising transfer.
- Remove fixing bolts of the lever of a choice of transfer.
- Disconnect a cable of a choice of transfer from an extension piece clip on the transfer lever.
|
|
1 — a cable of a choice of transfer
2 — knot of a manual choice of transfer
3 — a clip of the extension piece of a cable of a choice of transfer |
|
|
Installation (for type-1)
|
|
The new knot of the lever of a choice of transfer of type-1 has a blocking cam with a hairpin in the provision of connection of a cable. Remove this hairpin after attach a blocking cable to a cam of blocking and tighten a cable nut. |
|
|
1 — a hairpin of a cam of blocking (only in new knot of a choice of transfer) |
For installation execute removal procedure upside-down, paying attention to the following:
|
|
- Connect the end of a cable of blocking to a cam as it is described in the Section the Main cable of blocking.
- Having finished installation, be convinced that the system of blocking of a brake (key) works normally.
|
|
Installation (for type-2)
For installation of knot of a manual choice of transfer execute removal procedure upside-down, paying attention to the following instructions:
|
|
- Be convinced that the clip of a cable of a choice of transfer reliably holds a cable of a choice of transfer on knot of a manual choice of transfer.
- Tighten fixing bolts of knot of a manual choice of transfer to the specified value of the moment of an inhaling. Inhaling moment: fixing bolts of knot of a manual choice of transfer — 18 N • m (1.8 kg-m, 13.5 pounds foots).
|
|
1 — a cable of a choice of transfer
2 — knot of a manual choice of transfer
3 — a clip of the extension piece of a cable of a choice of transfer |
|
|
Check
|
|
Check the lever of a choice of transfer on smooth and accurate movement, and the situation indicator – on correctness of indications. |
|
|
