Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + General description
      + Diagnostics of an automatic transmission
      + Precautionary measures at diagnostics of malfunctions
      + Visual survey
      - Service out of a workshop
         Liquid level
         Liquid replacement
         Hoses of a cooler of oil
         Cable of a throttle of an automatic transmission
         Manual selector
         Gear shifting cable
         Switch (sensor) of a range of transmission
         The sensor of speed on an exit of an automatic transmission
         Interruption switch on demand
         Solenoidal valves
         Switch of change of food \norm
         Tubes of a cooler of oil
      + System of blocking of brakes
      + system Check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Switch (sensor) of a range of transmission

Check and adjustment


  1. Switch the choice lever in the situation "N".
  2. Check, that the central line on a shaft of the manual valve was leveled with the zero line "N" on the switch. If they are not leveled, weaken a bolt of the switch and level lines.
  3. Check, that the engine was got in the situation "N" and "P", and not got in situation "D", "2", "L" or "R". Also check, that in the situation "R" backing headlights joined.
  4. If failure condition it is not possible to eliminate with an adjustment way, disconnect a hitch of the switch of provision of transmission and check contact existence, switching the lever of a choice of transfer, as shown in the table.

1 — the zero line "N"
2 — the central line on a shaft of the manual valve