Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
+ Mechanical transmission (type 1)
+ Mechanical transmission (type 2)
- Automatic transmission (4 A/T)
+ General description
+ Diagnostics of an automatic transmission
+ Precautionary measures at diagnostics of malfunctions
+ Visual survey
- Service out of a workshop
Liquid level
Liquid replacement
Hoses of a cooler of oil
Cable of a throttle of an automatic transmission
Manual selector
Gear shifting cable
Switch (sensor) of a range of transmission
The sensor of speed on an exit of an automatic transmission
Interruption switch on demand
Solenoidal valves
Switch of change of food \norm
Tubes of a cooler of oil
+ System of blocking of brakes
+ system Check
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Gear shifting cable
Tip-1
Tip-2
Adjustment (for type-1)
|
|
- Before a nut tightening on the end of a cable switch the lever of a choice of transfer to the situation "N".
- Also switch in the situation "N" the lever of a manual choice of transfer.
|
|
-
Be convinced that under the above described conditions the nut and cable connection has a gap.
- If the cable of a choice of transfer was shifted, move it in the arrow C direction, against the stop, and then be convinced that the lever of a choice is in the situation "N".
|
|
|
1 — the sensor (switch) of provision of transmission
2 — a cable of a choice of transfer
3 — the lever of a manual choice of transfer
4 — the hinge of a cable of a choice of transfer |
- Turn A nut a hand while it will not concern the hinge of a cable of a manual choice of transfer.
- Then tighten B nut a wrench.
- After installation of a cable of a choice of transfer check the following:
- Push the car when the lever of a choice of transfer is switched in the situation "P". The car should not move.
- The car cannot go in the situation "N".
- The car can go in situation "D", "2", and “L”.
- The car can reverse in the situation "R".
|
|
1 — the hinge of a cable of a choice of transfer
And — to level the cable hinge
In — to tighten a wrench |
|
|
Adjustment (for type-2)
|
|
- Weaken a nut (1) lever of manual switching (from a choice cable).
- Switch the lever of a choice of transfer to the situation "N".
|
|
- Level the central line (2) on a shaft of the manual valve (3) with the zero N (4) line.
|
- Tighten a nut (1) lever of manual switching (from a cable of a choice of transfer) to the specified value of the moment of an inhaling. Inhaling moment: a nut of the lever of manual switching (a) — 19 N • m (1.9 kg-m, 14.0 pounds foots).
- After installation of a cable of a choice of transfer check the following:
- Push the car when the lever of a choice of transfer is switched in the situation "P". The car should not move.
- The car cannot go in the situation "N".
- The car can go in situation "D", "2", and “L”.
- The car can reverse in the situation "R".
|
|
|
|
