Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
   - Mechanical transmission (type 1)
      System description
      Diagnostics
      - Service out of a workshop
         Oil for a transmission
         Gear shifting lever
         Illumination switch
         Back fixture of the engine
         Transmission removal
         Transmission installation
         The case extension piece (for model with a drive on two wheels and the G16 and J20 engine)
         Oil epiploon of the case extension piece (for model with a drive on two wheels and the G16 and J20 engine)
   + Mechanical transmission (type 2)
   + Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


5917e1e5



Oil epiploon of the case extension piece (for model with a drive on two wheels and the G16 and J20 engine)

Removal and installation

 PERFORMANCE ORDER

  1. Remove the driveshaft as it is described in Head Driveshafts, in the Section Driveshaft.
  1. By means of a screw-driver remove an oil epiploon (1) from the case extension piece (2).
  1. By means of the special tool (A) and a plastic hammer establish a new oil epiploon (1) in the case extension piece (2) until the oil epiploon (1) will not concern a step part of the case extension piece (2). Do not forget to put greasing on the region of an oil epiploon. “A”: greasing 99000-25010. Special tool (A): 09951-16060.
  2. Establish the driveshaft as it is described in Head Driveshafts, in the Section Driveshaft.