Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
   - Mechanical transmission (type 1)
      System description
      Diagnostics
      + Service out of a workshop
   + Mechanical transmission (type 2)
   + Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

System description

The manual transmission consists of a leading shaft, the main shaft, a countershaft and transfer of the backing, established in the aluminum case. Its transfers represent five forward speeds in synchronous gearing and one speed of a backing in system of continuous gearing.

Transfers of the main shaft keep on needle bearings, and on them rings of the synchronizer and a sleeve and synchronizer naves are established.

The case of the lever of gear shifting is above behind the case of a transmission and has a cam which let's to direct transfer be switched from fifth speed to a backing.

As the aluminum case is sealed by laying of liquid type, at its assembly after dismantling it is necessary to put original hermetic or its analog on adjoining surfaces.

Besides, connecting bolts of the case should be tightened a wrench to the specified value of the moment of an inhaling, avoiding unduly strong or unduly weak tightening.