Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
- Mechanical transmission (type 1)
System description
Diagnostics
- Service out of a workshop
Oil for a transmission
Gear shifting lever
Illumination switch
Back fixture of the engine
Transmission removal
Transmission installation
The case extension piece (for model with a drive on two wheels and the G16 and J20 engine)
Oil epiploon of the case extension piece (for model with a drive on two wheels and the G16 and J20 engine)
+ Mechanical transmission (type 2)
+ Automatic transmission (4 A/T)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
The case extension piece (for model with a drive on two wheels and the G16 and J20 engine)
Dismantling
Assembly
|
|
- Establish an oil epiploon as it is described in this Chapter in the Section the Oil epiploon of the case extension piece (for model with a drive on two wheels and the G16 and J20 engine).
|
|
- After drawing of greasing establish directing pins (5), returnable springs (3 and 4) and bolts of returnable springs (2) and tighten to the specified value of the moment of an inhaling. After installation check that each pin moves smoothly. “A”: greasing 99000-25010. Moment of an inhaling (a): 23 N • m (2.3 kg-m, 17.0 pounds foots).
|
- Establish the speedometer sensor on the case extension piece (1).
|
|
|
|
