Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
- Electric equipment
   + body Electric equipment
   + lighting System
   - Electric equipment system
      + General description
      + Diagnostics
      + the Works made on the car
      - Major maintenance
         - Generator
            Removal
            Installation
            Dismantling [Type 60 A]
            Dismantling [Type 70 A and 80 A]
            Survey [Type 60 A]
            Survey [Type 70 A and 80 A]
            Replacement of brushes
            Assembly [Type 60 A]
            Assembly [Type 70 A and 80 A]
      + Specifications
      Inhaling moments
   + Tools/information for drivers


5917e1e5



Replacement of brushes

Type 60 A

Address to the Sections Dismantling [Type 60 A] and Assembly [Type 60 A].

Types 70 A and 80 A

 PERFORMANCE ORDER

  1. Remove a back cover and a shchetkoderzhatel.
  1. Otpayayte also remove a brush and a spring.
  2. Pass a wire of a new brush through a spring and an opening in a shchetkoderzhatel and insert a spring and a brush in a shchetkoderzhatel.
  3. Solder a brush wire in a shchetkoderzhatel, observing the specified length of an open part of a brush. Open length of "a": 10.5 mm (0.413 inches).
  4. Check that the brush smoothly moves in a shchetkoderzhatel.
  1. Cut off a superfluous wire.
  1. Put isolating paint on solder area.