The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Check of a steering column on existence of damages at failure (at a cabriolet)//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   - Steering wheel and steering column
      - Steering wheel and steering column not equipped with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            Steering wheel
            Podrulevye switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Bottom shaft of a steering
            Check of a steering column on existence of damages at failure (at a cabriolet)
            Check of a steering column and the top shaft of a steering on existence of damages at failure (at not "cabriolet")
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
      + the Steering wheel and a steering column with a safety cushion
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Check of a steering column on existence of damages at failure (at a cabriolet)

At the had an accident cars with damage of a body the steering column can be damaged or its situation is broken.

Check

 PERFORMANCE ORDER

  1. Check reliability of fastening of two capsules (1) to a fixing bracket of a steering column. Check a gap between capsules and a fixing bracket (2) helmsman of a column. From both parties the gap should make 0 mm.
  1. If there is a gap or capsules are weakened, replace a steering column
  2. Check two plates (3) on existence of any damages (cracks or breaks). If any defects are found, replace a steering column.
  3. Measure “a” distance. If it less than specified length, replace a column with the new. Length of a steering column: “a” — 895 ± 0.8 mm (35.24 ± 0.03 inches).
1 — a steering column
  1. Check the bottom epiploon of a steering column on existence of deformations or breakages.
  2. If defect is found, replace.
1 — the bottom epiploon of a steering column
  1. Check couplings of a steering shaft and a shaft on existence of any damages (cracks, breaks, malfunctions or excessive mobility). At detection of defects replace the bottom steering shaft or a steering column.
  2. Check a steering shaft on smoothness of rotation. If defects are found, replace a steering column.
  3. Check a steering shaft and a column on bends, cracks and deformations. If defects are found, replace a steering column.