Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   - Steering wheel and steering column
      - Steering wheel and steering column not equipped with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            Steering wheel
            Podrulevye switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Bottom shaft of a steering
            Check of a steering column on existence of damages at failure (at a cabriolet)
            Check of a steering column and the top shaft of a steering on existence of damages at failure (at not "cabriolet")
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
      + the Steering wheel and a steering column with a safety cushion
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Podrulevye switches

Removal

 PERFORMANCE ORDER

  1. Disconnect "minus" a battery cable on the battery terminal.
  2. Remove a steering wheel from a steering column. See in this Chapter Undressed the Steering wheel.
  3. Uncover openings of a steering column (1).
Not cabriolet.

Cabriolet

* — If enters into a complete set
  1. Unscrew bolts (3 pieces) covers of a steering column (1).
  2. Separate the top cover (3) and the bottom cover (2) and remove them.
Not cabriolet.
Cabriolet.
  1. Disconnect all wires of podrulevy switches.
  2. Remove podrulevy switches (1) from a steering column.

Not cabriolet

2 — a bolt

Cabriolet

2 — a bolt

Survey

Check wires of podrulevy switches about existence of signs of an oplavleniye, deformation or other damages. If wires are damaged, replace them.

Installation

 PERFORMANCE ORDER

  1. Establish podrulevy switches (1) on a steering column.
  2. Connect all wires which were disconnected at removal.

Not cabriolet

2 — a bolt

Cabriolet

2 — a bolt
  1. Establish top (2) and the bottom (3) covers of a steering column.
  2. Tighten bolts (1) cover of a steering column.

Not cabriolet

* — саморез
** — standard bolt

Cabriolet

* — саморез
** — standard bolt

At installation of the top and bottom covers pay attention to that between them wires of podrulevy switches did not get.

  1. Establish a cover of an opening of a steering column (1).
  2. Establish a steering wheel on a steering column. See in this Chapter Undressed the Steering wheel.
  3. Connect "minus" a battery cable.

Not cabriolet.

Cabriolet

2 — if enters into a complete set