Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   - Steering wheel and steering column
      - Steering wheel and steering column not equipped with a safety cushion
         General description
         + Diagnostics
         - Service out of a workshop
            Steering wheel
            Podrulevye switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            Steering lock (ignition switch)
            Bottom shaft of a steering
            Check of a steering column on existence of damages at failure (at a cabriolet)
            Check of a steering column and the top shaft of a steering on existence of damages at failure (at not "cabriolet")
            Lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         Special tool
      + the Steering wheel and a steering column with a safety cushion
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


5917e1e5



The top shaft of a steering (at not a cabriolet)

Never turn a steering wheel at the removed top shaft of a steering. If the such occurs, and centering of a contact winding will be broken (on podrulevy switches), it is necessary to align it again. Besides, if to turn a steering wheel more, than on two and a half turns, the contact winding will break.

Removal

 PERFORMANCE ORDER

  1. Turn a steering wheel so that forward wheels of the car looked directly forward.
  2. Turn the ignition switch in the situation "LOCK" and take out a key.
  1. Put leveling labels (3) on the coupling of a shaft (2) and on a shaft (from the top steering shaft) that then on them it is correct to establish a shaft.
  1. Having unscrewed a bolt (4) from the top party of the coupling of a shaft (2) and having weakened a bolt (5) from the bottom party of a shaft, pull the coupling of a shaft (2) towards the bottom shaft (as shown shooters in drawing).
  1. Unscrew a bolt (1) and a nut (2) top couplings of the top steering shaft.
  1. Unscrew fixing bolts (4 pieces) top steering shaft.
  2. Remove the top steering shaft from the car.

Survey

Check serviceability of a shaft of a steering as it is described below in this Chapter in the Section Check of a steering column and the top shaft of a steering on existence of damages at failure (at not a cabriolet).

Installation

 PERFORMANCE ORDER

  1. Be convinced that forward wheels and a steering wheel are in the situation corresponding to rectilinear movement of the car.
  1. Establish the top steering shaft on an epiploon insert. Tighten fixing bolts (1) top steering shaft to the specified value of the moment of an inhaling. Inhaling moment: fixing bolts of the top steering shaft — (a): 23 N • m (2.3 kg-m, 17.0 pounds foots).
  1. Put on the coupling of a steering shaft (1) the top shaft (2), having combined the labels (3) put before removal of a shaft.
  1. Insert a bolt of the coupling of a shaft (the top party of a shaft) (2) into the coupling of a steering shaft (1). At first tighten a bolt of the coupling of a shaft (the top party of a shaft) (2) to the specified value of the moment of an inhaling, and then a bolt of the coupling of a shaft (the bottom party of a shaft) (3) to the specified value of the moment of an inhaling. Inhaling moment: a bolt of the coupling of a steering shaft — (c): 25 N • m (2.5 kg-m, 18.0 pounds foots).
  1. Combine a point of "A" of a steering column (1) with an opening for a bolt of "B" of the top coupling of the top steering shaft. Then connect the top coupling of the top steering shaft.
  1. Take (2) top couplings of the top steering shaft new a bolt and a nut (1). Tighten a nut (1) top coupling of the top steering shaft to the specified value of the moment of an inhaling. Inhaling moment: a nut of the top coupling of the top steering shaft — (a): 23 N • m (2.3 kg-m, 17.0 pounds foots).