The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - the Table of diagnostics of malfunctions of ABS//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
   + Brakes
   + Brake highway/hose / main cylinder of a brake
   + Forward brakes
   + Parking and back brake
   - Anti-blocking brake system (ABS)
      + General description
      - Diagnostics
         Precautionary measures at diagnostics of problems
         Table of diagnostics of malfunctions of ABS
         Checks
         Codes of diagnostics of malfunctions
         System scheme
         Tables
         Check of codes of diagnostics of malfunctions (KDN)
         Vehicle service
         Check of operation of the hydraulic ABS block
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Table of diagnostics of malfunctions of ABS

See the detailed description of each step to points below.

Step

Action

Yes

No

1

Analyse complaints of the client, confirmation of symptoms of a problem and record KDN. Whether there is a malfunction code?

Pass to a step 2

Pass to a step 5

2

Execute driving check. Whether the malfunction symptom is defined?

Pass to a step 3

Pass to a step 6

3

Check a code of diagnostics of malfunction. It is a malfunction code?

Pass to a step 4

Pass to a step 5

4

Examine and repair, having addressed to the KDN corresponding table. Then execute final check for confirmation after KDN dumping. Whether there was a problem again?

Pass to a step 7

End

5

Examine brake system, having addressed to the Diagnostic table in Head Brake system. Then execute final check for confirmation after KDN dumping. Whether there was a problem again?

Pass to a step 7

System in a good condition

6

Check, whether there are no periodically arising problems, having addressed to the Section Interrupting or weak connection in Head the General information and the corresponding chain of codes of the malfunctions, described in steps 1-3. Then execute final check for confirmation after KDN dumping. Whether there was a problem again?

Pass to a step 7

System in a good condition

7

Check record of codes of malfunction and cleaning. Whether there is a malfunction code?

Pass to a step 2

Pass to a step 5