Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      General description
      + Diagnostics
      - Service out of a workshop
         Cylindrical spring
         Bottom draft
         Top draft
         Lateral draft
         Zadny Bridge and wheel bearing
         Internal oil epiploon of the back bridge
         Case of the back bridge
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Internal oil epiploon of the back bridge



  1. Remove the back bridge. For more details see points 1-7 of the Section Zadny Bridge and the wheel bearing in this Chapter.
  2. Fix a brake plate, having inserted a screw-driver into a fixing opening of a stopper of the bearing.
  3. Remove an internal oil epiploon of the back bridge (1).

Carefully, do not bend a brake tube.

1 — an internal oil epiploon of the back bridge
2 — the bridge case



  1. By means of the special tool insert an oil epiploon (4) until it will not concern a safety lock of an epiploon (3) in the bridge case.
    • Special tool:
      • (A): 09913-75510
      • “A”: Greasing 99000-25010
      • “B”: Hermetic 99000-31110
  • Be convinced that the oil epiploon (4) is established without an inclination.
  • On drawing check, that the oil epiploon (4) was established in the correct direction.
  1. Further manipulations are described in this Chapter in the Section Zadny Bridge and the wheel bearing (Installation, points 6-11).
1 — a hammer
2 — a screw-driver
3 — an epiploon safety lock
4 — an oil epiploon
5 — the body center