Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      General description
      + Diagnostics
      + Service out of a workshop
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Back suspension bracket

General description

All fixing elements of a suspension bracket are very important, as work of the main parts and systems depends on them, and/or they can affect repair cost. In need of their replacement it is necessary to use only details with the same number or similar details. Never use for replacement suitable details of more poor quality. To provide good fastening of a detail at its replacement it is necessary to use the specified values of the moment of an inhaling.

Never try to heat up, temper or straighten any parts of a suspension bracket. Replace the damaged part new, differently it will break.

The back suspension bracket represents type of the rigid bridge from 5 links, consisting of cylindrical springs, the back bridge, shock-absorbers, the top drafts, the bottom drafts and lateral draft.

The bottom and top drafts incorporate to the bridge and a body by means of plugs so that the bridge moves up and down, and plugs thus serve as reference points.

The shock-absorber is established between a body and the bridge for absorption of vertical movement of a body of the car.

At installation of a drain oil stopper of a gear wheel of differential clear a carving part of a stopper and put on it hermetic (SUZUKI BOND No.1215, 99000-31110).


1 — the case of the back bridge 2 — a cylindrical spring 3 — the bridge 4 — the shock-absorber 5 — the top draft 6 — the bottom draft	7 — a stopper of level of oil 8 — a stopper of the bearing of a wheel 9 — the bearing of a back wheel 10 — a brake plate 11 — a drain stopper for oil 12 — lateral draft