Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
+ Forward suspension bracket
- Back suspension bracket
General description
+ Diagnostics
- Service out of a workshop
Shock-absorber
Cylindrical spring
Bottom draft
Top draft
Lateral draft
Zadny Bridge and wheel bearing
Internal oil epiploon of the back bridge
Case of the back bridge
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Top draft
Removal
|
|
- Lift the car and remove a back wheel.
|
|
- If there is a system of anti-blocking of brakes of ABS, disconnect the plug of a wire of the sensor of speed of a wheel (1) from the left top draft (2).
|
- Remove the top draft (1).
|
|
1 — the top draft
2 — a bolt |
|
|
Installation
|
|
- Establish the top draft (3) on a frame of the chassis and the bridge case; the direction of bolts at installation is shown in drawing below. A nut do not tighten.
- In drawing direction definition at installation for the left top draft (3) at the car with system of anti-blocking of brakes of ABS is shown.
- Attach the plug of a wire of the sensor of speed of a wheel (4) to the top draft (3) (if there is a system of anti-blocking of brakes of ABS).
|
|
1 — a forward bolt of the top draft
2 — a nut
3 — the left top draft
5 — a back bolt of the top draft
6 — a washer
7 — the body center
8 — the forward party |
|
|
- Lower the lift and in not loaded condition of the car tighten a forward bolt and a back nut of the top draft to the specified value of the moment of an inhaling.
- Inhaling moment:
- forward bolt of the top draft (a): 95 N • m (9.5 kg-m, 69 pounds foots)
- back bolt of the top draft (b): 90 N • m (9.0 kg-m, 65 pounds foots)
|
|
|
|
|
