Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
- Forward suspension bracket
General description
+ Diagnostics
- Service out of a workshop
Stabilizer of the cross-section stability/plug
Shock-absorber rack
Cylindrical spring
Limiter of a dynamic course of a suspension bracket / Rubber nest of a spring
Wheel nave (including the wheel bearing)
Rotation hinge/axis
Suspension bracket/plug lever
+ Back suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Service out of a workshop
Stabilizer of the cross-section stability/plug
Removal
|
|
- Lift the car.
- Remove bolts of a fixing bracket of the stabilizer of cross-section stability (7).
- Remove nuts of the spherical hinge of the stabilizer (6), a washer (5) and plugs (4).
- Remove the stabilizer of cross-section stability (2) together with spherical hinges (3).
- Disconnect spherical hinges of the stabilizer (3) from a stabilizer (2) bar.
|
|
1 — the suspension bracket lever
2 — the stabilizer of cross-section stability
3 — spherical hinges of the stabilizer
4 — the plug
5 — a washer
6 — nuts of the spherical hinge of the stabilizer
7 — bolts of a fixing bracket of the stabilizer of cross-section stability |
|
|
Installation
|
|
For the correct installation of a bar of the stabilizer of cross-section stability, on both parties, be convinced that color paint (1) on a bar of the stabilizer is combined with the fixing plug (3) on the right and at the left. |
|
|
1 — the painted part
2 — a bracket of the fixing plug
3 — the fixing plug |
|
|
- Connect spherical hinges and a stabilizer bar.
- Establish spherical hinges of the stabilizer on operating levers.
|
|
Do not tighten till the end of a nut of the spherical hinge of the stabilizer. |
- Establish brackets of the fixing plug of a bar of the stabilizer.
- At installation of the stabilizer collect all its parts, without tightening them to check stabilizer centering on the parties. Be convinced that the spherical hinge costs in neutral situation at a look from the top party of a body.
- Tighten bolts of a bracket of the stabilizer and a nut of the spherical hinge of the stabilizer to the specified value of the moment of an inhaling.
|
|
Inhaling moment:
- Nut of the spherical hinge of the stabilizer (a): 26 N • m (2.6 kg-m, 19.0 pounds foots)
- Nut of the spherical hinge of the stabilizer (b): 50 N • m (5.0 kg-m, 36.5 pounds foots)
- Bolt of a bracket of the stabilizer (c): 23 N • m (2.3 kg-m, 17.0 pounds foots)
|
|
|
|
|
