Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
- Transmissions
   + Mechanical transmission (type 1)
   + Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
      + General description
      + Diagnostics of an automatic transmission
      + Precautionary measures at diagnostics of malfunctions
      + Visual survey
      + Service out of a workshop
      + System of blocking of brakes
      - System check
         Main cable of blocking
         Transmission removal (if there is a transfer)
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment



When moving transmission with the hydrotransformer established on it watch that it was in horizontal situation. If it bends a forward part, the hydrotransformer can fall that can lead to a trauma.

For installation into place execute removal procedure upside-down. Follow given below and at the left values of the moment of an inhaling.

Inhaling moment

N • m


pounds - foot

Bolts and nuts of connection of an exhaust pipe No. 1 and main




Nuts of connection of the exhaust silencer with an exhaust pipe No. 2




Universal flange connecting bolts and nuts




* Bolts of a tube of filling of oil

* Bolts of an arm of a cable of a choice of transfer




1 — an automatic transmission
2 — transfer (a full drive)

3 — back fixture of the engine
4 — a back fixing element of the engine

Inhaling moment.

1 — a drive plate
2 — the hydrotransformer
3 — rigid fastening of the case on the right (if is)

4 — an automatic transmission
And — hermetic 99000-31110

Inhaling moment.


  1. Reliably fix wires and hoses.
  2. Adjustment of a cable of a choice of transfer is described in the Section a gear shifting Cable.
  3. Control of a cable of a throttle of an automatic transmission is described in the Section the Cable of a throttle of an automatic transmission.
  4. For filling of liquid of an automatic transmission and adjustment of its level follow procedure of check of level of liquid.
  5. Attach the battery and check that the engine and a transmission work normally.
  6. At installation of a plate of a drive use special bolts.