Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
- Brake system
   + Brakes
   + Brake highway/hose / main cylinder of a brake
   - Forward brakes
      + General description
      Check and adjustment
      - Vehicle service
         Brake shoe of a forward disk
         Support of a brake of a forward disk
         Disk of a forward brake
      Inhaling torque
      Necessary materials
   + Parking and back brake
   + Anti-blocking brake system (ABS)
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Disk of a forward brake



  1. Lift a vehicle and remove a wheel.
  1. Remove support assembly, having released bolts of the holder (2 pieces).

At removal, be careful not to damage not a flexible hose of a brake and not to press the brake lever.

  1. Remove a disk, having turned off 8 mm bolts (1) (2 pieces).


Address to the item. Section survey the Brake shoe of a forward disk in this Chapter.


See. The note at the beginning of this Chapter.


  1. Establish a disk on a wheel nave.
  2. Establish assembly a support on a rotary fist.
  1. The torque of an inhaling of bolts of the holder should correspond to the specification. Inhaling torque: bolt of the holder of a support (a): 85 N • m (8.5 kg-m, 61.5 pounds foots).
  1. The torque of an inhaling of nuts of forward wheels should correspond to the specification. Inhaling torque: wheel nut (b): 100 N • m (10.0 kg-m, 72.5 pounds foots).
  1. Upon termination of installation, perform check of work of a brake.