Suzuki Grandee of Wetar + General information + Maintenance and greasing + Heater, ventilation and conditioner + Steering + Suspension bracket + Wheels and tires + Forward driving shaft/bearing of a shaft. Oil epiploon + Driveshafts + Brake system + Engines + Fuel system + ignition System + start System + release System + Transmissions + Coupling - Transfer General description + Diagnostics - Service out of a workshop Oil of a transfer case Gear shifting lever Switch of transfer of the all-wheel drive car + Oil epiploons of transfer Sensor of speed Back fixture of the engine Transfer module Removal Installation + Forward and back differentials + Windows, mirrors, locks and security measures. Immobilizer + Electric equipment
|
Service out of a workshop
Oil of a transfer case
Check and replacement
|
- Before check and replacement of oil switch off the engine and lift the car horizontally.
- At the lifted car check level of liquid and leak. If leak is found, adjust or eliminate it.
Chart of viscosity of SAE (society of automobile engineers of the USA)
- Merge old oil, having removed a drain stopper (1).
|
- Each time when lifting car for any service check, whether there is no leakage of oil, and a condition of hoses сапуна.
- If in the merged oil there will be a water or rust impurity, check a hose сапуна and a transfer casing.
|
- Fill in the new specified oil, to the specified volume (to an urovnevy opening).
|
It is very much recommended to use oil for a SAE 75 W-90 broadcast. |
- The oil specification for transfer:
- oil brand: API GL-4
- viscosity: SAE 75 W-85, 75 W-90 or 80 W-90
- oil volume: 1.7 liter (3.6/3.0 USA/Imp. pints)
- Tighten a drain stopper (1) and уровневую / a filling stopper (2) to the specified value of the moment of an inhaling, having put previously on a carving of jams (1 and 2) hermetic. “A”: hermetic 99000-31110. Moment of an inhaling (a): 23 N • m (2.3 kg-m, 17.0 pounds foots).
|
1 — a drain stopper 2 — уровневая / a filling stopper 3 — the transfer case |
|
|
|
|