Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
- Maintenance and greasing
   + Service
   - Maintenance
      + Engine
      + ignition System
      + Fuel system
      + System of decrease in toxicity of an exhaust
      - Chassis and body
         Coupling
         Brake disks and brake slips
         Brake drums and brake shoes
         Brake hoses and tubes
         Brake liquid
         Lever and cable of the parking brake
         Tires, rims
         Suspension bracket
         Driveshaft and power shafts
         Transmission oil for RKPP
         Liquid for AKPP
         Transformer and reduktorny oils
         Steering
         System of the amplifier of a wheel (if it is equipped)
         All loops, latches and locks
         The Salonny filter (if it is equipped)
      Final survey
   Recommended liquids and lubricants
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


5917e1e5



Suspension bracket

Check

 PERFORMANCE ORDER

  1. Check bolts and suspension bracket nuts on a zatyanutost and tighten if necessary.
  1. Repair or replace defective spare parts if they are.

Forward suspension bracket

 PERFORMANCE ORDER

  1. Check SPU (the stabilizer of cross-section stability) on existence of damages or deformation.
  1. Check plugs on existence of damages, wear or damage.
  2. Check a rack on existence of damages, deformation, leakage of oil and overall performance. If the rack became unfit for use, replace it assembled, since it not folding.
  3. For check operations see. Check of a rack of the shock-absorber and/or a cylindrical spring in the Section Suspension bracket.
  4. Check the rack case on existence of damages.
  5. Check on existence of damages and deformation a spring nest.
  6. Check on existence of damages of a spring emphasis.
  7. Check a rack support on wear, damages and deformation.
  1. Check boots of spherical support on leakage of greasing, slipping, a gap or other damages. Check сайлентблоки suspension bracket levers on wear or existence of other damages.

Back suspension bracket

 PERFORMANCE ORDER

  1. Check shock-absorbers on existence of damages, deformation, a leakage and overall performance.
  1. Check сайлентблоки on wear and existence of other damages.
  1. Check springs, the top levers, the bottom levers and a cross-section beam on deformation and damages.
  2. Check the top levers, the bottom levers, a cross-section beam and a spring emphasis on wear, and other damages.
  1. Check other parts of a suspension bracket on existence of damages, easing or absent parts; also details with signs of wear and lack of greasing
  1. Replace details in which defects are found.