The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Check of a rack of the shock-absorber and/or a cylindrical spring//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   - Forward suspension bracket
      General description
      - Diagnostics
         Diagnostic table
         Check of the stabilizer of cross-section stability and plug
         Check of a rack of the shock-absorber and/or cylindrical spring
         Check of the lever of the suspension bracket/hinge
         Check of the hinge of the lever of a suspension bracket
         Check of the plug of the lever of a suspension bracket
         Check of a rim, nut and bearing
      + Service out of a workshop
   + Back suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Check of a rack of the shock-absorber and/or cylindrical spring

 PERFORMANCE ORDER

  1. Check a rack on leakage of oil. If malfunction is found, replace all rack entirely as it does not understand.
  2. Check functionality of a rack
  3. Check and modify pressure of air in wheels as it is specified. 3-4 times rock a body, pushing in front from a checked rack. Each time push with identical force and pay attention to resistance of a rack at a push and return.
  4. Also pay attention to that, how many time will shake a car body to a stop after you will clean hands. Do the same for rack check on the other hand.
  5. Compare resistance of a rack and quantity of kachaniye on the right and at the left. They should be identical. At a serviceable rack the body should stop, as soon as you will clean hands or after one-two small fluctuations. If there are doubts concerning racks, compare results of their check to check of other car with good racks.
  1. Check on damages and deformations.
  1. Check a rack boot on damages or cracks.
  2. Check a spring nest on cracks or deformations.
  3. Check wear of the limiter of a course of a suspension bracket.
  4. Check a rack opravka on wear, cracks or deformations.
  5. Replace faulty parts on points 2-10.