Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
- General information
   + Precautionary measures
   Main precautionary measures
   Precautionary measures at work with the catalyst
   Precautionary measures at service of electric chains
   + Procedure of check of electric chains
   Interrupting or weak connection
   Precautionary measures at installation of means of mobile communication
   + Identification information
   Warning, warning and information stickers
   Places of lifting of the car
   The list of the reductions which are using in this management
   + Metric information
   Standard moments of inhalings
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Main precautionary measures

The following preventions and cautions describe the main precautionary measures which are necessary for observing at car service.

These precautionary measures are applicable to the majority of service operations described in this management, and, it is not obligatory that they will repeat in each operation where they should be observed.

At a car raising surely follow the instructions described in subsection of the Place of lifting of the car in Head the General information. When for carrying out service works it is necessary that the engine worked, make sure that the hand brake and a transmission is active is in neutral situation for cars with MKPP and in the situation "P" for cars with AKPP. Hold hands, hair, clothes, the tool etc. far away from fans and belts at the working engine.

If it is necessary that the engine worked indoors, make sure that the extract for exhaust gases works.

Do not perform service works in places where flammable materials can have contact to hot final system. At work with toxic and legkovosplamenyaemy materials (such as gasoline and a coolant), provide good ventilation of a workplace.

To avoid burns, steer clear of hot metal details, such as a radiator, a final collector, an exhaust pipe, the exhaust silencer etc.

The new and fulfilled engine oil can be dangerous. Children and pets can suffer, if take a sip the new or fulfilled oil. Store the new and fulfilled oil and oil filters far away from children and pets. At long contact to the fulfilled oil the cancer of skin at laboratory animals was revealed. Short-term contact to the fulfilled oil can cause irritation of skin. To reduce irritating influence from contact to the fulfilled oil put on a uniform with long sleeves and water-proof gloves (such, as for ware washing) at replacement of engine oil. At contact of engine oil to skin, carefully wash out water with soap. Erase all clothes and rags on which oil got, reuse or correctly utilize the fulfilled oil and filters.

Check that the cowl is completely closed and will latch before a trip. If is not present, it can unexpectedly open during driving, complicating the review that can lead to failure.

Before the beginning of any service operation, cover wings of the car, a seat and all parts of the car which can be scratched or soiled in operating time. Also you should show consideration for the clothes since, for example, buttons can damage car polishing.

During work after the electrician which do not demand use of the storage battery, disconnect the minus plug from joint stock bank.

At joint stock bank removal, disconnect in the beginning the minus plug, and then plusovy. At joint stock bank connection, connect in the beginning the plusovy plug, and then minus after that dress a cover.

At removal of spare parts which will be repeatedly used, put them one after another that then to establish them in the correct sequence on places.

When using epiploons, laying, consolidations, the sealing rings, blocking washers, шплинтов, самоконтрящихся nuts and some other spare parts, it is necessary to replace them with the new. Also before installation of new laying, consolidations, etc. carefully remove the material remains from stykovochny surfaces.

Check that all used spare parts ideally pure.

At lubricant or hermetic use, check that it the specified type.

"And" — hermetic 99000-3 1150

Use special tools where it is necessary.

Special adaptation

And — 09917-98221
B — 09916-58210

At a detachment of vacuum hoses, paste a label with the description of the correct adjusting position, for correct subsequent assembly.

After service of fuel, oil, vacuum, exhaust, brake systems and cooling system, check all contours of the related systems on leaks.

At work with the cars equipped with injector fuel system, never separate a contour between the fuel pump and an injector without preliminary dumping of pressure since fuel can scatter under pressure.