Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
- General information
   + Precautionary measures
   Main precautionary measures
   Precautionary measures at work with the catalyst
   Precautionary measures at service of electric chains
   + Procedure of check of electric chains
   Interrupting or weak connection
   Precautionary measures at installation of means of mobile communication
   + Identification information
   Warning, warning and information stickers
   Places of lifting of the car
   The list of the reductions which are using in this management
   + Metric information
   Standard moments of inhalings
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Standard moments of inhalings

Each bolt should be tightened according to the moment specified in each section of this management. If to such information it is not presented, use the following table of the applicable moments of an inhaling, for each bolt. When using bolt, stronger, than original, seize the moment specified for the original.

For flange bolts, flange nuts and самоконтрящихся durability nuts 4T and 7T add 10 % by the time of an inhaling, specified in the table below. The table is applicable only for light-alloy or steel connectors.

Table of the moments of an inhaling

Durability class Diameter of a carving (nominal diameter) (mm)
4 5 6 8 10
Bolts durabilities equivalent to a class 4T N • m 1.5 3.0 5.5 13 29
kg-m 0.15 0.30 0.55 1.3 2.9
pounds foots 1.0 2.5 4.0 9.5 21.0
Bolts durabilities equivalent to a class 6.8 N • m 2.4 4.7 8.4 20 42

kg-m 0.24 0.47 0.84 2.0 4.2
pounds foots 2.0 3.5 6.0 14.5 30.5
Bolts durabilities equivalent to a class 6.8 with a flange N • m 2.4 4.9 8.8 21 44
kg-m 0.24 0.49 0.88 2.1 4.4
pounds foots 2.0 3.5 6.5 15.5 32.0
Bolts durabilities equivalent to a class 7T N • m 2.3 4.5 10 23 50
kg-m 0.23 0.45 1.0 2.3 5.0
pounds foots 2.0 3.5 7.5 17.0 36.5
Bolts durabilities equivalent to a class 8.8 without a flange N • m 2.5 6.3 11 27 56
kg-m 0.31 0.63 1.1 2.7 5.6
pounds foots 2.5 4.5 8.0 19.5 40.5
Bolts durabilities equivalent to a class 8.8 with a flange N • m 3.2 6.5 12 29 59
kg-m 0.32 0.65 1.2 2.9 5.9
pounds foots 2.5 5.0 9.0 21.0 43.0

Durability class Diameter of a carving (nominal diameter) (mm)
12 14 16 18
Bolts durabilities equivalent to a class 4T N • m 45 65 105 160
kg-m 4.5 6.5 10.5 16
pounds foots 32.5 47.5 76.0 116.0
Bolts durabilities equivalent to a class 6.8 N • m 80 125 193 280

kg-m 8.0 12.5 19.3 28
pounds foots 58.0 90.5 139.5 202.5
Bolts durabilities equivalent to a class 6.8 with a flange N • m 84 133 263 298
kg-m 8.4 13.3 20.3 29.8
pounds foots 61.0 96.5 147.0 215.5
Bolts durabilities equivalent to a class 7T N • m 85 135 210 240
kg-m 8.5 13.5 21 24
pounds foots 61.5 98.0 152.0 174.0
Bolts durabilities equivalent to a class 8.8 without a flange N • m 105 168 258 373
kg-m 10.5 16.5 25.8 37.3
pounds foots 76.0 121.5 187.0 270.0
Bolts durabilities equivalent to a class 8.8 with a flange N • m 113 175 270 395
kg-m 11.3 17.5 27 39.5
pounds foots 82.0 126.5 195.5 286.0

* Samokontryashchayasya nut