Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   - Forward suspension bracket
      General description
      - Diagnostics
         Diagnostic table
         Check of the stabilizer of cross-section stability and plug
         Check of a rack of the shock-absorber and/or cylindrical spring
         Check of the lever of the suspension bracket/hinge
         Check of the hinge of the lever of a suspension bracket
         Check of the plug of the lever of a suspension bracket
         Check of a rim, nut and bearing
      + Service out of a workshop
   + Back suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Check of a rim, nut and bearing


  1. Check each rim on dents, deformations and cracks. It is necessary to replace strongly damaged disk.
  1. Check, how wheel nuts are tightened, and, if necessary, tighten them to the specified value of the moment of an inhaling. Inhaling moment: wheel nuts (a): 100 N • m (10.0 kg-m, 72.5 pounds foots).
  1. Check wear of the bearing of a wheel. Having tightened a lock-nut to the specified value of the moment of an inhaling, put the measuring device with the dial to the center of a nave of a wheel and measure axial люфт. Limit axial люфта wheel bearing: 0.05 mm (0.002 inches).
  1. If results of measurement exceed a limit, replace the bearing.
  1. Povrashchayte a wheel to check noise existence in the bearing and smoothness of rotation. If defect is found, replace the bearing.