The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Leaving from rectilinear movement, or maintaining//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   - Suspension bracket, wheels and tires
      + General diagnostics
      - Diagnostics of tires
         The non-uniform and/or increased wear
         Wear indicator
         Instability
         Leaving from rectilinear movement, or maintaining
      Diagnostics of vibrations
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Leaving from rectilinear movement, or maintaining

"Maintaining" is a spontaneous withdrawal of the car from rectilinear movement in any party.

Maintaining usually happens is caused:

  • Violation of corners of installation of wheels.
  • Wrong adjustment of brakes.
  • Design of tires.

The design of tires can cause maintaining the car. The cord arrangement can be an example. The steel cord at rotation of a wheel can cause lateral efforts. If diameter of one party of a tire a little more than diameter of other party, a tire heels on this party. It will cause lateral efforts that will lead to maintaining the car.

Check procedure on the previous page should be executed to exclude possibility of influence of corners of installation of wheels on maintaining the car.

  • Procedure of diagnostics of maintaining a tire partially differs from the procedure of shift of tires described in the maintenance instruction. If tires with different high-speed characteristics are established on one axis, be convinced that it did not cause deterioration of running characteristics.
  • Back tires do not lead to maintaining manifestation.