Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation


Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   - Suspension bracket, wheels and tires
      + General diagnostics
      - Diagnostics of tires
         The non-uniform and/or increased wear
         Wear indicator
         Instability
         Leaving from rectilinear movement, or maintaining
      Diagnostics of vibrations
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + power steering System
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

5917e1e5


Diagnostics of tires

The non-uniform and/or increased wear

The non-uniform or increased wear of a protector can be caused by many reasons. Such as: the wrong pressure in tires, recommended shift of tires, a driving manner, the wrong corners of installation of wheels was not carried out.

If the following conditions were noted, it is necessary to execute recommended shift of wheels.

  • Wear of forward tires differs from wear of the back.
  • Non-uniform wear of drawing of a protector on one tire.
  • Wear of a protector of a forward left and forward right wheel the unequal.
  • Wear of a protector of a back left and back right wheel the unequal.
  • Chasheobraznost, dents on the tire etc.

If the following conditions were noted, it is necessary to execute check a catch of installation of wheels.

  • The left and right tires of a forward axis are not identical are worn-out.
  • Non-uniform wear of drawing of a protector on one tire.
  • The protector of forward tires is worn-out on the one hand.
Passing of abrupt turns for the speeds, excessive pressure in tires, recommended shift of tires was not carried out.
The wrong corners of installation of wheels, non-uniform design of the tire, driving with pro-slippings.