Lamp of pressure of oil
Sensor of pressure of oil
Removal and installation
For details see. The section Check of pressure of oil in Head Engines (for cars with G16 engines) or in Head the Mechanical part of the J20 engine (Check of pressure of oil) (for cars with J20 engines) this Management.
|
|
1 — the sensor of pressure of oil |
Check
|
|
|
|
- Disconnect a wire from the sensor of pressure of oil (1).
|
- Check on contiguity of connection between the plug of the sensor (2) and the block of cylinders (3).
|
At the working engine
|
Gap
|
|
At an engine stop
|
Contiguity
|
- If results of check do not correspond to the specification, replace the sensor of pressure of oil (1).
|
|
|
