Table of codes of diagnostics of malfunctions (DTC) (Code of automatic transmission)
|
Number of a code of malfunction (DTC)
|
The found malfunction
|
|
With the scanning tool
|
Without the scanning tool
|
|
—
|
12
|
—
|
|
Р0705
|
72
|
Malfunction of the scheme of the sensor of provision of transfer
|
|
Р0715
|
76
|
Malfunction of the scheme of the sensor of speed of the leader of the shaft/turbine
|
|
Р0720
|
75
|
Malfunction of the scheme of the sensor of speed on an exit
|
|
*1
Р0741
|
It is not applied
|
Work or jamming of the TSS solenoid (blocking)
|
|
Р0743
|
65
66
|
TSS electric solenoid (blocking)
|
|
*1
Р0751
|
It is not applied
|
Work or solenoid jamming pereklyucheniya-A (No. 1)
|
|
Р0753
|
61
62
|
Electric solenoid pereklyucheniya-A (No. 1)
|
|
*1
Р0756
|
Not comment.
|
Work or solenoid jamming pereklyucheniya-V (No. 2)
|
|
Р0758
|
63
64
|
Electric solenoid pereklyucheniya-V (No. 2)
|
|
*1
Р1875
|
It is not applied
|
Malfunction of the scheme of the bottom switch of a full drive
|
|
Defined condition
|
Malfunction indicator
|
|
The car without the socket for the monitor
|
The car with the socket for the monitor
|
|
Problems are not present
|
—
|
—
|
|
At the same time on an entrance many signals or not a signal move at movement at speed 60 km/h or more.
|
2 motion cycles
|
It is not applied
|
|
Speed of rotation of a leading shaft below the specified value at car movement with transfer in situation "D" and the specified speed of the engine or above.
|
2 motion cycles
|
1 motion cycle
|
|
The signal of the sensor of speed on an exit does not arrive, though the signal of speed of the car arrives.
|
2 motion cycles
|
1 motion cycle
|
|
Real work of TSS will not be coordinated with INCL. function management / OFF, going from the block of electronic control to TSS.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid of management of TSS is switched on is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of gear shifting going from the electronic control unit (RSM) to an automatic transmission (And/t), will not be coordinated with the real provision of transfer of an automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid pereklyucheniya-A (No. 1) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of gear shifting going from the electronic control unit (RSM) to an automatic transmission (And/t), will not be coordinated with the real provision of transfer of an automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid pereklyucheniya-V (No. 2) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
Difference between the speed of the car defined by the sensor of speed of the car (VSS), and the speed of the car defined by the sensor of speed on an exit and compensated by the bottom switch of a full drive, more specified in the specification.
|
2 motion cycles
|
It is not applied
|
*1: It is applied only on the car without the socket to the monitor.
