Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
- Electric equipment
   + body Electric equipment
   + lighting System
   - Electric equipment system
      + General description
      + Diagnostics
      - The works made on the car
         + Battery
         - Generator
            Generator belt
      + Major maintenance
      + Specifications
      Inhaling moments
   + Tools/information for drivers





Generator

Generator belt

G16 engines

See. A belt of the cooling fan in Head engine Cooling.

Survey

See. The water pump, the generator, a steering with the amplifier and/or a driving belt of the A/C compressor (J20 engines) in the Section Maintenance.

1 — a generator belt
2 — a pulley of a cranked shaft
3 — a pulley of the fan of a radiator
4 — a tension pulley
5 — the tension device

Removal

Disconnect a negative wire from the battery before removal and installation of a belt of the generator.


 PERFORMANCE ORDER

  1. Weaken the tension device, having turned it clockwise.
  2. Holding the tension device and a belt, remove also a generator belt.

Installation

 PERFORMANCE ORDER

  1. Weaken the tension device, having turned a tension pulley clockwise.
  2. Holding the tension device, establish a generator belt.

1 — a generator belt
2 — the tension device
3 — a bolt of the tension device


  • Be convinced that the belt enters into all flutes of a pulley.
  • After installation of a belt of the generator execute described above check and be convinced that the indicator of a tension has standard indicators.