The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Analysis//Suzuki the Grandee of Wetar since 1998 /

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
- Start system
   + General description
   - Diagnostics
      Block repair
      Analysis
      Assembly
      Survey
      Work check
      Specifications
      Type of 0.9 kV
   Necessary materials
   Special tool
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Analysis

  • Before starter analysis, surely arrange a mark in those places (A and B) to avoid possible mistakes.
  • Do not clamp a collar a vice and do not beat on it a hammer at repair.

1 — the electromagnetic switch
2 — a forward casing
3 — a collar

 PERFORMANCE ORDER

  1. Remove a protector (if is) and the electromagnetic switch.
1 — the electromagnetic switch
2 — a protector

Do not assort this switch. If it is faulty, replace it as assembly.


1 — the electromagnetic switch
2 — a spring
3 — the piston
  1. Remove bolts, then disconnect reducer assembly from starter assembly.
1 — bolts
2 — reducer assembly
  1. To repair reducer assembly, remove laying and planetary transfers.
1 — planetary transfer
2 — laying
  1. Remove rubber consolidation and a plate.
1 — rubber consolidation
2 — a plate
  1. Remove lever assembly together with the lever.
1 — lever assembly
2 — the lever
  1. Release the lock ring of a gear fixed by a persistent ring.
1 — a persistent ring
2 — a lock ring of a gear
3 — assembly of the obgonny coupling
  1. Remove a persistent ring, then extend a lock ring of a gear, the obgonny coupling and internal transfer. Special tool (A): 09900-06107.
1 — internal transfer
2 — a persistent ring
3 — a lock ring of a gear
4 — the obgonny coupling
  1. Remove a back bracket and a shchetkoderzhatel.
1 — a back bracket
2 — an anchor
3 — a collar
  1. Remove an anchor from a collar and then a ball since the end of a shaft of an anchor.
1 — an anchor
2 — a collar
3 — a ball
  1. Remove a shchetkoderzhatel from a back bracket.
1 — a back bracket
2 — a shchetkoderzhatel
  1. Remove springs of brushes and a brush.
  1. Remove a cap of a back bracket, and then remove a back sleeve.
1 — back sleeves
2 — a cap of a back bracket
3 — a back bracket