Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      General description
      - Diagnostics
         Diagnostic table
         Shock-absorber check
         Check of the bottom draft, top draft, lateral draft
         + Check of the case of the bridge and cylindrical spring
         Check of a stopper of the bearing and internal oil epiploon of the bridge
         Check of a rim, nut and bearing
      + Service out of a workshop
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

Shock-absorber check

PERFORMANCE ORDER

Check on existence of deformations or damages.
Check plugs on wear or damages.
Check on existence of signs of leakage of oil.
Replace any faulty parts.

At work with the back shock-absorber in which there is a gas under a high pressure, it is necessary to observe the following precautionary measures:

Not to assort the shock-absorber.
Not to place it in fire.
Not to store in its places where it can become hot.
Before utilization it is necessary to drill in it an opening in a place specified in drawing by an arrow, and to let out gas and oil. For this purpose put the shock-absorber sideways.
Gas in itself is harmless, but at its exit the shaving formed at drilling therefore surely put on goggles can take off.

"And": drill an opening in diameter about 3 mm (0.12 inches).