Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
- Steering
   + Suspension bracket, wheels and tires
   - Adjustment of corners of installation of wheels of a forward suspension bracket
      - General information
         Convergence of forward wheels
         Disorder of forward wheels
         Custer
         Preparation for adjustment of corners of installation of wheels of a forward suspension bracket
         Adjustment of a corner of a convergence of forward wheels
         Adjustment of a corner of disorder and kaster
         Angle of rotation of wheels
         Lateral sliding of wheels (standard)
   + power steering System
   + Steering wheel and steering column
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Adjustment of a corner of a convergence of forward wheels

 PERFORMANCE ORDER

  1. Convergence it is regulated by change of length of steering draft. Weaken lock-nuts on the left and right steering drafts and, then, scroll steering drafts on equal quantity of turns from the left and right parties to level value of a convergence to a preset value.
  1. In this adjustment the left and right steering draft should become identical length.

Before torsion of steering drafts, put greasing between draft and a protective cover protective covers of hinges were not overwound.

  1. After adjustment, tighten a lock-nut (1) with the corresponding moment. Inhaling moment: steering draft and lock-nut (and): 65 N • m (6,5 kg-m).

Check that protective covers of hinges were not overwound.