The device, service, Suzuki Grand Vitara SQ416/SQ420/420WD repair - Removal//Suzuki the Grandee of Wetar since 1998 / http://www.vindexexpo.ru

Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation



Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
   - Forward диффренциал
      + General description
      + Diagnostics
      - Service out of a workshop
         + Servicing
         + Check
         + Removal and installation
         Removal
         Installation
   + Back differential
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment





Removal

 PERFORMANCE ORDER

  1. Lift the car and merge oil.
  2. Disconnect air hoses a hose сапуна from the differential case.
  3. Before to remove the driveshaft, put leveling labels on a flange of connection and the driveshaft.
And — leveling labels
  1. Remove a driveshaft flange, having removed its 4 bolts and suspend it on a rope or something similar.

In case of a driveshaft vytaskivaniye previously it is necessary to merge transfer oil.

  1. Remove 3 bolts of the left fixing arm and 3 bolts of a flange of a power shaft to release the left side of differential.
1 — a bolt of a fixing arm
2 — a flange bolt and a nut
  1. Remove 2 bolts of a cross-piece to release back fixture of differential.
1 — bolts
  1. For back fixture of vtulkovy type remove bolts and a back fixing arm.
  2. For back fixture of vtulkovy type remove bolts and a back fixing arm No. 2.
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm
4 — a bolt of a back fixing arm No. 2
5 — a back fixing arm No. 2
  1. Having propped up the differential case a transmission jack, remove fixing bolts on the right side of the case.
1 — a bolt of a fixing arm
2 — a fixing arm of R
3 — the differential case
  1. Using two big screw-drivers as levers, pull out the right side of a power shaft from differential and remove the case from the car.

During this work be careful not to damage a casing of a power shaft.


1 — connection of a power shaft of R
2 — the differential case
3 — a transmission jack
4 — a screw-driver