Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
- Forward and back differentials
- Forward диффренциал
+ General description
+ Diagnostics
- Service out of a workshop
+ Servicing
+ Check
- Removal and installation
Differential accessories
Removal
Installation
+ Back differential
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
|
Removal and installation
Differential accessories
|
|
- Lift the car and turn a steering wheel to the right.
- Separate a fixing arm of R from the differential case, having removed bolts from its lower part.
- Remove a fixing arm of R, having removed a forward fixing bolt from its top part.
|
|
1 — a fixing bolt of an arm
2 — a fixing arm of R
3 — the differential case |
|
|
2 — a fixing arm of R
3 — the differential case
4 — a forward fixing bolt |
- Remove a fixing arm of L, having removed the top and bottom fixing bolts.
|
|
1 — the differential case
2 — a forward fixing bolt
3 — a fixing arm of L
4 — a bolt of a fixing arm |
- Check a condition of each plug. If it is damaged or spoiled, pull out it the special tool and a hydraulic press and replace.
- Special tool
- (a): 09951-26010
- (b): 09951-16080
- At installation on the press arrange to a shlitsa in each plug.
|
|
1 — a fixing arm of L
2 — the plug
3 — a fixing arm of R
And — alignment of a shlitsa 45 ° |
- Arrange each plug on an arm. Length of "a": 3.0 mm (0.12 inches).
|
|
1 — a fixing arm of R
2 — a fixing arm of L |
|
|
- At installation observe the following values of the moment of an inhaling:
- Inhaling moment
- (a): 85 N • m (8.5 kg-m, 61.5 pounds foots)
- (b): 50 N • m (5.0 kg-m, 36.5 pounds foots)
|
|
|
Back fixture (for the holder of forward differential)
Integral type
|
|
- Lift the car and remove a fixing design, having removed two bolts and nuts from the holder of differential and 2 bolts and nuts from a cross-piece.
- Check fixing rubber on damages and deterioration of a condition and replace if necessary.
- At installation observe the following value of the moment of an inhaling. Moment of an inhaling (a): 50 N • m (5.0 kg-m, 36.5 pounds foots).
|
|
1 — a bolt and a nut of a back fixing arm
2 — the holder of differential
3 — a cross-piece
4 — a bolt of a back fixing arm
5 — back fixture of differential |
|
|
Type with the plug
|
|
- Lift the car and remove a back fixing arm, having removed a back fixing bolt and bolts of a back fixing arm.
- Check fixing rubber on damages and deterioration of a condition and replace if necessary.
- At installation tighten back fixing bolts and bolts of a back fixing arm to the specified value of the moment of an inhaling.
- Inhaling moment:
- back fixing bolt (a): 85 N • m (8.5 kg-m, 61.5 pounds foots)
- bolts of a back fixing arm (b): 50 N • m (5.0 kg-m, 36.5 pounds foots)
|
|
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm |
|
|
|
|
