Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation


Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
- Engines
   + Mechanical part of the G16 engine
   + Mechanical part of the J20 engine
   - Engine cooling
      + General description
      + Diagnostics
      - Maintenance
         Check of level of cooling liquid
         Service and repair of system of cooling
         Washing and filling of system of cooling
         Regulation and check of a tension of a belt of the cooling fan
      + Routine maintenance of a vehicle
      Necessary service materials
      Technical characteristics of the rotating moment of an inhaling
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment

5917e1e5


Maintenance

Check of level of cooling liquid

In order to avoid a burn:

  • Do not uncover the tank while cooling liquid "boils",

and

  • Do not uncover a radiator, while the engine and a radiator the still hot.

Burning liquid and steam can be splashed out under pressure if any of covers is removed too quickly.


 PERFORMANCE ORDER

  1. To check level, lift a cowl and look via the "transparent" tank of cooling liquid.
  1. There is need to uncover no radiator to check level of cooling liquid. When the engine will cool down, check level of cooling liquid in the tank (1).
  1. Normal level of cooling liquid should be between marks "FULL" and "LOW" on the tank. If level of cooling liquid is lower than a mark "LOW" (3), uncover the tank and add the corresponding cooling liquid in the tank to finish level of cooling liquid to a mark "FULL" (2).
  2. Then close a cover.
  • If antifreeze of the recommended quality is used, there is no need to add additional stabilizers or additives which as declare, improve system. They can harm to the correct functioning of system.
  • At installation of a cover of the tank level arrows (4) on the tank and a cover.