Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
- Forward driving shaft/bearing of a shaft. Oil epiploon
   General description
   + Diagnostics
   - Service out of a workshop
      Power shaft
      Shaft bearing / oil epiploon
   Specifications of the moment of an inhaling
   Material necessary for service
   Special tool
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Shaft bearing / oil epiploon



  1. Remove a power shaft.
See in this Chapter Undressed the Power shaft.
  1. To remove the shaft bearing / an oil epiploon on the right side, lower differential oil.
  2. The lever for tires remove the left power shaft.
  3. Remove the left rack. See. The section a shock-absorber Rack in Head the Suspension bracket.
1 — the left power shaft
2 — the lever for tires
  1. Screw-driver remove an oil epiploon.
  2. Remove a cutting lock ring.
1 — an axial oil epiploon
2 — a cutting lock ring
3 — the axial bearing
  1. By means of special tools (A) and (B) remove the bearing.
    • Special tool:
      • (A): 09941-64510
      • (B): 09930-30102
1 — the shaft bearing



  1. Clear an oil epiploon of a power shaft and put lithium plastic greasing. Check an oil epiploon on damages and breakages. If necessary, replace. “A”: greasing 99000-25010.
  1. Insert the bearing of a power shaft the special tool (A) (on the left side). Special tool (A): 09913-75520.
  2. Establish a cutting lock ring.
1 — the shaft bearing
  1. By means of the special tool (B) and (C) insert an oil epiploon.
    • Special tool
      • (B): 09951-16090
      • (C): 09924-74510

As depth on which the oil epiploon in the shaft case is established, different on the right and at the left, check the labels put on the special tool (B) and establish each oil epiploon at level of the corresponding label.

1 — an oil epiploon of a shaft
2 — the right side
3 — the left side
  1. Establish the left power shaft.
  1. Establish the left rack. See subitem of 1-2 installation of the Section a shock-absorber Rack in Head the Suspension bracket.
  2. Establish a power shaft. See in this Chapter the Power shaft (Installation) Undressed.
  3. Fill the differential case with the specified oil for differential to the specified level.