Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
- Wheels and tires
   - General description
      Tires for replacement
      Wheel replacement
      Kolpachkovye nuts and wheel hairpins
   + Diagnostics
   + Servicing and small adjustment
   + Service out of a workshop
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
+ release System
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment


Wheel replacement

Wheels are subject to replacement if they погнуты, on them they have dents, excessive lateral or radial palpation, leakage of air through the welded connections, the extended boltovy openings if nuts stand not densely if they strongly rusted. Wheels with big palpation, than it is shown in drawing, can cause undesirable fluctuations.

The wheels established at replacement, should be similar initially established on loading capacity, diameter, width of a rim, shift and a fixing configuration. The wheel of the improper size or type can affect wheel and bearing service life, cooling of brakes, speedometer \odometer calibration, a road gleam with a body and the chassis.

For measurement of palpation of a wheel it is necessary to use the exact indicator. The tire can be on a wheel or is removed from a wheel. For the correct measurement it is necessary to establish a wheel on the stand for balancing.

Lateral and radial palpation with internal and external закраины rims is measured. The indicator strongly establish on a wheel, a wheel slowly rotate on a complete revolution and write down all indications of the indicator.

If the measured palpation exceeds the specified value, and at the stand to adjust a deviation it is not possible, it is necessary to replace a wheel. If instrument readings are distorted at the expense of welding, paint or scratches, they can be neglected.

Limit of lateral palpation of "a": 1.20 mm (0.047 inches)
Limit of radial palpation of "b": 1.20 mm (0.047 inches)