Suzuki Grand Vitara SQ416/SQ420/420WD
since 1998 of release
Repair and car operation
Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Brake system
+ Fuel system
+ ignition System
+ start System
+ release System
+ Mechanical transmission (type 1)
- Mechanical transmission (type 2)
- General description
Definition such as transfer
+ Automatic transmission (4 A/T)
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment
The manual transmission consists of a leading shaft, the main shaft, a countershaft and transfer of the backing, the established in aluminum and cast cases. Its transfers represent five forward speeds in synchronous gearing and one speed of a backing in system of continuous gearing.
Transfers of the main shaft keep on needle bearings, and on them rings of the synchronizer and a sleeve and synchronizer naves are established.
The case of the lever of gear shifting is above behind the case of a transmission and has a cam which let's to direct transfer be switched from fifth speed to a backing.
As aluminum and cast cases are sealed by laying of liquid type, at their assembly after dismantling it is necessary to put original hermetic or its analog on adjoining surfaces.
Besides, connecting bolts of the case should be tightened a wrench to the specified value of the moment of an inhaling, avoiding unduly strong or unduly weak tightening.