Suzuki Grand Vitara SQ416/SQ420/420WD

since 1998 of release

Repair and car operation

Suzuki Grandee of Wetar
+ General information
+ Maintenance and greasing
+ Heater, ventilation and conditioner
+ Steering
+ Suspension bracket
+ Wheels and tires
+ Forward driving shaft/bearing of a shaft. Oil epiploon
+ Driveshafts
+ Brake system
+ Engines
+ Fuel system
+ ignition System
+ start System
- Release system
   + General description
   + the Works made on the car
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. Immobilizer
+ Electric equipment



To avoid burns, do not touch hot system of release. Any works should be made when the system cooled down.

At servicing implementation for different time intervals check the following components of system of release:


  1. Check rubber laying on existence of damages and wear.
  1. Check release system on existence of leaks, weak contacts, dents and damages.
  1. If bolts or nuts are weakened, tighten them the specified moment of an inhaling. Data on the inhaling moments you will find in the Section Shumoglushitel of this Chapter.
  1. Check nearby sites of a body on existence of the damages, inaccurately sticking out external seams, the openings (holes) lacking or displaced parts and other defects which can cause hit of exhaust evaporations in car salon.
  2. Be convinced that components of system of release have from below (at the basis) a sufficient gap to avoid an overheat and possible damage of an upholstery of salon of the car.
  3. It is necessary to eliminate any damage immediately.